Share:
Standard: EN 196-1
Preparation of 40 x 40 x 160 mm Mortar Prisms
These three gang moulds are used to cast mortar prism specimens for flexural and compression tests, with dimensions as per standard requirement. Made from special alloy steel with a minimum surface hardness of HV200 and flat surfaces ensure reliable test result.
Technical Specifications
Preparation of 40 x 40 x 160 mm Mortar Prisms
These three gang moulds are used to cast mortar prism specimens for flexural and compression tests, with dimensions as per standard requirement. Made from special alloy steel with a minimum surface hardness of HV200 and flat surfaces ensure reliable test result.
Technical Specifications
| Model Number | NL 3006 X / 001 - A 001 |
| Material | Carbon Steel & Cast Iron |
| Dimension (mm) | 40 (H) x 40 (W) x 160 (L) |
| Hardness | Over 200 HV |
| Model Number | NL 3037 X / 001 |
| Material | Carbon Steel |
| Dimension (mm) | 40.1 (H) x 40 (W) x 160 (L) |
| Hardness | Over 200 HV |
| Model Number | NL 3037 X / 002 |
| Material | Carbon Steel |
| Dimension (mm) | 40.1 (H) x 40 (W) x 160 (L) |
| Hardness | Over 500 HV |
Inquiry - Three Gang Mould For Prisms NL 3037 X / 001 & 002
